Welcome to ftp.vim.org,
Hosted by ftp.nluug.nl
Current directory: /pub/pub/OpenBSD/3.5/
Contents of README:|
Quick Install Instructions If there are bugs found in this CD release, workaround information can be found at http://www.OpenBSD.org/errata.html Please refer to the following files on the three CDROM's for extensive details on how to install OpenBSD 3.5 on your machine: CD1:3.5/i386/INSTALL.i386 CD1:3.5/vax/INSTALL.vax CD2:3.5/amd64/INSTALL.amd64 CD2:3.5/macppc/INSTALL.macppc CD3:3.5/sparc/INSTALL.sparc CD3:3.5/sparc64/INSTALL.sparc64 Other architectures are available on the FTP site, due to not fitting onto the 3 CDs we are able to provide. Quick installer information for people familiar with OpenBSD, and the use of the "disklabel -E" command. If you are at all confused when installing OpenBSD, read the relevant INSTALL.* file as listed above! i386: Play with your BIOS options, and see if you can enable booting from CD1. Many older PCs have ROM bugs with CD booting. If CD booting fails, write CD1:3.5/i386/floppy35.fs to a floppy, then boot that. Use floppyB35.fs instead for greater scsi controller support, or floppyC35.fs for better laptop support. If you are mixing OpenBSD with another operating system, you will want to read the INSTALL.i386 document. If you have problems with pcibios, use "> boot -c" and then "UKC> disable pcibios", and following the install read the pcibios(8) manual page. VAX: Please refer to the INSTALL.vax file. AMD64: If booting of CD3 fails, write CD1:3.5/amd64/floppy35.fs to a floppy, then boot that. MACPPC: Use CD2. At poweron, hold down the 'c' key until the display turns on and shows "OpenBSD/macppc Boot". Or at the Open Firmware prompt type "boot cd:,ofwboot /3.5/macppc/bsd.rd" SPARC: To boot off CD3, type "boot cdrom 3.5/sparc/bsd.rd", or "b sd(0,6,0)3.5/sparc/bsd.rd" depending on your ROM version. Alternatively, write CD3:3.5/sparc/floppy35.fs to a floppy and boot using "boot fd()" or "boot floppy" depending on your ROM version. On machines using the Forth prom, you must use new mode. SPARC64: To boot off CD3, type "boot cdrom". Otherwise, write CD3:3.5/sparc64/floppy35.fs to a floppy and boot it using "boot floppy" or write CD3:3.5/sparc64/miniroot35.fs to the swap partition on the disk and use the PROM to boot from that partition using "boot disk:b". CD 2 track 2 is an audio track of the "CARP License" skit and "Redundancy must be free" song. Voices by Tony Binns, Peter Rumpel. Backup vocals by Jonathan Lewis and Ty Semaka. Piano by Janet Lewis, Acoustic guitars by Chantal Vitalis. Bass and Geddy Lee questioning by Jonathan Lewis. Lyrics by Bob Beck. Source Code Use CD#3 contains src.tar.gz. Using this tree it is possible to get a head-start on using the anoncvs servers as described at http://www.OpenBSD.org/anoncvs.html. Using these files results in a much faster initial CVS update than you could expect from a fresh checkout of the full OpenBSD source tree. There are two ways of using the CD: Copy the tree off it, (assuming the CD is mounted on /mnt): # cd /usr/src # tar xvfz /mnt/src.tar.gz After this, /usr/src will be a checkout area where all cvs(1) commands will work OK. Refer to http://www.OpenBSD.org/anoncvs.html for more details. CD#3 also contains the following: Changelogs/ This is all of the CVS commit logs we have generated while working on the project. ports.tar.gz Our ports tree. Refer to CD3:/PORTS XF4.tar.gz A CVS checkout of our version of the XFree86 source tree. Important man pages to read are config(8) and options(4), which will describe in detail how kernels are built. Further Notes: To make a floppy under MS-DOS, use CD1:/3.5/tools/rawrite.exe. Under Unix, use "dd if=<file> of=/dev/<device> bs=32k" (where device could be "floppy" or "rfd0c" or "rfd0a"). To write a floppy under NT, use CD1:/3.5/tools/ntrw.exe instead. Use properly formatted perfect floppies with NO BAD BLOCKS or you will lose. Installing Packages The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. We call these things packages. The number of applications vary according to available disk space. Check the directory 3.5/packages/<arch> to see which packages are available for your hardware architecture. To install one or more of these packages you must 1) become the superuser (root) 2) mount the appropriate CD-ROM 3) use the ``pkg_add'' command to install the software Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: <enter your root password> # mkdir -p /cdrom # mount /dev/cd0a /cdrom # cd /cdrom/3.5/packages/<arch> # pkg_add -v <package-name> # <add more packages if desired> # umount /cdrom Your hardware architecture can be determined by issuing the command ``arch''. The response will be something like ``OpenBSD.sparc''. ``sparc'' is the architecture. The various m68k architectures share packages. Package names are usually the application name and version with .tgz appended, e.g. emacs-21.3.tgz. Some packages -- pgp for example -- can not be placed on the CD-ROM due to patent or other restrictions. To obtain such packages use the command: # pkg_add -v ftp://ftp.openbsd.org/pub/OpenBSD/3.5/packages/<arch>/<package-name> File System Layout The following are suggested sub-tree sizes for a full system install. The numbers include enough extra space to permit you to run a typical home system that is connected to the internet: SYSTEM / /usr /var /usr/X11R6 alpha 50M 433M 20M 160MB amd64 50M 433M 20M 160MB amiga 27M 173M 20M 64M hp300 26M 120M 20M 50M hppa 50M 433M 20M 160MB (static) i386 30M 172M 20M 85M mac68k 26M 172M 20M 75M macppc 50M 433M 20M 160MB mvme68k 26M 173M 20M 60MB (no Xserver) mvme88k 50M 400M 20M 160MB (static, no Xserver) pegasos 50M 433M 20M 160MB sparc 35M 194M 20M 50M sparc64 50M 433M 20M 160MB vax 50M 433M 20M 160MB (static) When you are in the disklabel editor, you may choose to make your entire system have just an 'a' and 'b' partition. The 'a' partition you set up in disklabel will become your root partition, which should be the sum of all the 3 main values above (/, /usr, and /var) plus some space for /tmp. The 'b' partition you set up automatically becomes your system swap partition -- we recommend a minimum of 32MB but if you have disk to spare make it at least 64MB. However, we recommend you use many separate partitions so that users cannot fill up your important partitions as easily, thus causing nasty denial of service problems. If you are extra cautious, you will make at least the following separate partitions: / swap /usr /var /tmp /usr/local /usr/X11R6 /home. OpenBSD is free software You can do with it as you like, subject to very few conditions (described at www.OpenBSD.org/policy.html). But free software isn't written without money. Network links, hardware costs, release engineering and testing work; all these things take money and significant effort on the part of those who have made this what it is. Please reward the developers who have made OpenBSD what it is, YOU can donate funds or hardware to get your name listed on our Donations page www.OpenBSD.org/donations.html. Contact Theo de Raadt or send a donation cheque in Canadian or US funds to: OpenBSD 812 - 23rd Ave SE Calgary, Alberta Canada T2G 1N8 (Make the cheque out to "Theo de Raadt": cheques made out to "OpenBSD" cannot be cashed) No major funding or cost-sharing of the project comes from any company or educational institution. Theo works full-time on improving OpenBSD and paying bills, many other developers expend spend significant quantities of time as well. Ongoing operating funds for the project are generated by sales of CDs, tshirts, and posters, so if you like yours, please buy one for a friend. Please be generous, and OpenBSD will keep making a release every 6 months. This is our 15th release on CDROM, and we certainly hope we can continue! - Thanks to everyone who has purchased an OpenBSD CD-ROM.
Name Last modified Size
Parent Directory - Changelogs/ 07-Apr-2004 12:38 - alpha/ 06-Apr-2004 23:08 - amd64/ 06-Apr-2004 22:11 - cats/ 06-Apr-2004 23:38 - hp300/ 07-Apr-2004 00:16 - hppa/ 12-Apr-2004 20:04 - i386/ 14-Apr-2004 12:39 - mac68k/ 07-Apr-2004 05:32 - macppc/ 07-Apr-2004 03:03 - mvme68k/ 12-Apr-2004 09:01 - mvme88k/ 07-Apr-2004 04:10 - packages/ 12-Apr-2004 08:39 - sparc/ 07-Apr-2004 04:39 - sparc64/ 07-Apr-2004 05:10 - tools/ 01-Apr-2004 23:19 - vax/ 07-Apr-2004 02:34 - .old-sys.tar.gz 06-Apr-2004 19:35 14M ANNOUNCEMENT 30-Apr-2004 22:12 21K HARDWARE 06-Apr-2004 18:59 3.0K PACKAGES 06-Apr-2004 18:59 69K PORTS 06-Apr-2004 18:59 2.5K README 06-Apr-2004 18:59 7.8K SIZES 06-Apr-2004 18:59 1.4K XF4.tar.gz 06-Apr-2004 18:59 60M ftplist 06-Jul-2004 12:03 6.6K ports.tar.gz 06-Apr-2004 18:59 6.7M root.mail 06-Apr-2004 18:59 75K src.tar.gz 06-Apr-2004 19:35 94M sys.tar.gz 07-May-2004 19:56 15M
NLUUG - Open Systems. Open Standards
Become a member and get discounts on conferences and more, see the NLUUG website!