En este apéndice podrás encontrar ficheros completos de configuración y salidas de algunos de los comandos que han surgido al largo del documento.
Debe tenerse en cuenta que esto implica que no estan generalizados sino que simplemente se corresponden a las distintas configuraciones de mCii, mi computadora. No obstante puede ayudar para hacer comprender al lector el tipo de salidas y configuraciones (y la consistencia entre ellas).
root@mCii:~ # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT333 AGP] 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 00:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 43) 00:0b.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 18) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 18) 00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 18) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 10) 01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4200] (rev a3)
root@mCii:~ # less /etc/mtab /dev/hdb3 / reiserfs rw 0 0 proc /proc proc rw 0 0 devpts /dev/pts devpts rw,mode=0620,gid=5 0 0 /dev/hda1 /windows/C vfat rw,noexec,nosuid,nodev,gid=100,iocharset=iso8859-1,code=437 0 0 /dev/hda5 /windows/D vfat rw,noexec,nosuid,nodev,gid=100,iocharset=iso8859-1,code=437 0 0 /dev/hda6 /windows/E vfat rw,noexec,nosuid,nodev,gid=100,iocharset=iso8859-1,code=437 0 0 /dev/hda7 /windows/F vfat rw,noexec,nosuid,nodev,gid=100,iocharset=iso8859-1,code=437 0 0 /dev/hdb5 /debian reiserfs rw,noexec,nosuid,nodev 0 0 /dev/hdb6 /test ext3 rw 0 0 /dev/hdb7 /container reiserfs rw 0 0 shmfs /dev/shm shm rw 0 0 usbdevfs /proc/bus/usb usbdevfs rw 0 0 /dev/ram1 /tmp/ramdisk1 ext3 rw 0 0 /dev/ram2 /tmp/ramdisk2 ext2 rw 0 0 /dev/ram0 /tmp/ramdisk0 ext3 rw 0 0
O también ejecutar el comando df para ver el tipo y tamaño de cada partición:
root@mCii:~ # df Filesystem 1K-blocks Used Available Use% Mounted on /dev/hdb3 6184828 2639964 3544864 43% / /dev/hda1 1036021 818990 217031 80% /windows/C /dev/hda5 33824576 17391872 16432704 52% /windows/D /dev/hda6 3142548 1157896 1984652 37% /windows/E /dev/hda7 1042136 918212 123924 89% /windows/F /dev/hdb5 6032184 1336996 4695188 23% /debian /dev/hdb6 695684 413944 246400 63% /test /dev/hdb7 16273308 2396104 13877204 15% /container shmfs 127984 0 127984 0% /dev/shm /dev/ram1 9677 1043 8134 12% /tmp/ramdisk1 /dev/ram2 38733 13 36720 1% /tmp/ramdisk2 /dev/ram0 48409 4127 41782 9% /tmp/ramdisk0
lba32 boot=/dev/hda install=/boot/boot-menu.b map=/boot/map delay=20 message=/boot/xray-blue.boot prompt timeout=150 default=SuSE-8.1 # particion principal image=/boot/vmlinuz append=" hdd=ide-scsi" label=SuSE-8.1 root=/dev/hdb3 initrd=/boot/initrd vga=792 read-only image=/debian/boot/vmlinuz-2.4.18-bf2.4 label=Debian-Woody root=/dev/hdb5 vga=792 read-only image=/boot/vmlinuz.shipped append=" hdd=ide-scsi" label=SuSE-8.1-safe root=/dev/hdb3 initrd=/boot/initrd.shipped vga=792 read-only image=/debian/boot/vmlinuz-2.4.18-bf2.4.old label=Woody-OLD root=/dev/hdb5 vga=792 read-only optional # esta imagen se corresponde con la particion utilizada # para construir un Live Linux CD image=/test/boot/vmlinuz label=LiveCD root=/dev/hdb6 ramdisk=35000 vga=792 read-only optional other=/dev/hdb1 label=BeOS-1.1 restricted other=/dev/hda1 label=Redmond image=/boot/memtest.bin label=memTest86
En el ejemplo podemos ver algunos cambios para adaptarlo a nuestras necesidades, tal como se desarrolla en el capítulo referente a Live Linux CD!
default linux prompt 1 timeout 600 display boot.msg #indicamos las teclas de funcion que invocaran diferentes pantallas F1 boot.msg F2 general.msg F3 param.msg F4 colors.msg label linux kernel vmlinuz append ramdisk_size=35000 vga=791 root=/dev/hdc label text kernel vmlinuz append text ramdisk_size=8192 root=/dev/hdc label expert kernel vmlinuz append expert ramdisk_size=8192 root=/dev/hdc label nofb kernel vmlinuz append nofb ramdisk_size=8192 root=/dev/hdc label lowres kernel vmlinuz append lowres ramdisk_size=8192 root=/dev/hdc
HOST
{
ethernet = 00:50:FC:B1:B1:BD;
FILE
{
path = "/rplboot/eb-5.0.10-rtl8139.lzrom";
load = 0x1000;
};
execute = 0x1006;
framesize = 1500;
blocksize = 1440;
};
default-lease-time 600; # 10 min
max-lease-time 7200; # 2 hores
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# You must add a ddns-update-style statement to /etc/dhcpd.conf.
# To get the same behaviour as in 3.0b2pl11 and previous
# versions, add a line that says "ddns-update-style ad-hoc;"
# Please read the dhcpd.conf manual page for more information. **
ddns-update-style ad-hoc;
subnet 192.168.1.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option domain-name openMo6;
range dynamic-bootp 192.168.1.1 192.168.1.10;
}
group{
# filename <imatge kernel TFTP diskless>
host metrakilate {
hardware ethernet 00:50:FC:B1:B1:BD;
fixed-address 192.168.1.2;
filename "/tftpboot/vmlinuz-metrakilate";
option root-path "192.168.1.1:/tftpboot/metrakilate";
}
host mCi {
hardware ethernet 00:E0:7D:D5:25:3A;
fixed-address 192.168.1.3;
filename "/tftpboot/vmlinuz-mCi";
option root-path "192.168.1.1:/tftpboot/mCi";
}
}