Begin4
Title:		PLC.pm perl module to read/write data with Allen-Bradley PLC's
Version:	0.14
Entered-date:	January 13, 2004
Description:	PLC.pm and the included example programs allow you
		to read and write data from/to Allen-Bradley PLC5,
		MicroLogix, and SLC programmable controllers, 
		All data types that I know about are supported. 
		Currently, three different communication
		methods are supported: (1)- Ethernet (to Ethernet PLC5's and
		SLC505's, and to MicroLogix using a 1761-NET-ENI module);
		(2)- Serial Port (RS232 to port 0 of a PLC5 or SLC,
		or to a KF2 module connected to PLC's and/or SLC's via DH+,
		or to a KF3 module connected to SLC's via DH485);
		and (3)- ControlLogix Gateway (Ethernet to a ControlLogix
		Gateway with an ethernet module and at least one
		DHRIO module connected to DH+ PLC's and/or SLC's).
		Note: PLC5, SLC, KF2, KF3, DHRIO, and ControlLogix Gateway
		are registered trademarks of Allen-Bradley, but Allen-Bradley
		has no connection with this software.
		This version is still somewhat experimental. Read the warnings
		before you use it. Use at your own risk.
		Developed and tested under Linux.
Keywords:	PLC SLC MicroLogix Allen-Bradley DF1 perl
Author: 	dan.baker@bigfoot.com (Dan Baker)
Maintained-by:	dan.baker@bigfoot.com (Dan Baker)
Primary-site:	http://www.ibiblio.org/pub/Linux/libs
		PLC-0.14.tar.gz
		PLC-0.14.lsm
Alternate-site:
Original-site:
Platforms:	Linux and perl (requires the SerialPort module)
Copying-policy:	Artistic License
End