VERSION: :1,$s/2022-01-15/2022-01-15/g
ISO:     :1,$s/202201141100Z/202201141100Z/g
NetBSD:  :1,$s/9.99.93/9.99.93/g
PKGSRC:  :1,$s/2022/2022/
# Check MD5 filename before post this mail.
# why dont we take off alone.

To: port-armNetBSD.org@localhost
Subject: 2022-01-15-netbsd-raspi-aarch64.img
From: Jun Ebihara <jun@soum.co.jp>

I've updated 2022-01-15-netbsd-raspi-aarch64.img.gz for RPI4.

https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-01-15-aarch64/2022-01-15-netbsd-raspi-aarch64.img.gz
https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-01-15-aarch64/MD5

Topics:
- openssl-1.1.1m
- libffi-3.4.2nb1
- mlterm-3.9.1nb2
- ruby27-mikutter-5.0.2

- Raspberry Pi 4 UEFI Firmware v1.32

 Always use non translating DMA in DT mode [tianocore/edk2-platforms@efff29c]
 Make sure normal memory is not be marked uncached [tianocore/edk2-platforms@af649f8]
 Make sure all drivers are disconnected before reboot [tianocore/edk2-platforms@63d520f]
 Fix ACPI MMIO host bridge window attribute [tianocore/edk2-platforms@ab6fcc2]
 Revert to using latest start4.elf/fixup4.dat
  
- openssh 8.8 https://www.openssh.com/txt/release-8.8
cf.
  ~/.ssh/config
  Host old-host
        HostkeyAlgorithms +ssh-rsa
        PubkeyAcceptedAlgorithms +ssh-rsa

- SD/MMC Configration
  Switch Default uSD/eMMC Routing: Arasan SDHCI -> EMMC2
  http://mail-index.netbsd.org/port-arm/2021/08/08/msg007393.html
  the Arasan SDHCI is used to connect bwfm(4). 

In this image, a synbolic link added

/libdata/firmware/if_bwfm:
ln -s brcmfmac43455-sdio.raspberrypi,4-model-b.txt "brcmfmac43455-sdio.Raspberry Pi 4 Model B.txt"
to avoid
bwfm0: autoconfiguration error: NVRAM file not available
 
- only for RPI4 
  (fill dtb for RPI3?)
- build script
 https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64
- [Issue] Can't recognize DOS partition from Windows
  Should I Use MBR version image?
- rpi cm4 + waveshare mini base board B seems stop after kernel load
  http://mail-index.netbsd.org/port-arm/2021/06/30/msg007343.html
- pkgin support
  edit /usr/pkg/etc/pkgin/repositories.conf
  cf.
  http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022
  and pkgin update

sysinfo:
 bozohttpd-20220104 NetBSD-9.99.93 openssl-1.1.1m
 sh-20181212-20220114074052Z tcsh-6.23.02
 userland-NetBSD-9.99.93/evbarm

pkgsrc:
 at-spi2-atk-2.38.0nb1 at-spi2-core-2.40.3nb1 atk-2.36.0nb1
 bash-5.1.16 cairo-gobject-1.16.0nb6 curl-7.81.0
 desktop-file-utils-0.26nb1 fossil-2.17nb1 gdk-pixbuf2-2.42.6nb1
 git-base-2.34.1nb1 glib2-2.70.2nb1 gmp-6.2.1nb2 gnutls-3.7.2nb2
 gobject-introspection-1.68.0nb1 gtk2+-2.24.33nb4 gtk3+-3.24.30nb2
 harfbuzz-3.1.2nb1 icu-70.1 libcups-2.3.3op2nb4 libffi-3.4.2nb1
 libxkbcommon-1.3.1nb1 libxml2-2.9.12nb2 libxslt-1.1.34nb7
 lintpkgsrc-4.97 m17n-lib-1.8.0nb6 medit-1.2.0nb19
 mlterm-3.9.1nb2 nghttp2-1.46.0nb1 p11-kit-0.24.0nb4
 pango-1.48.10nb1 pkg_install-20211115 pkgin-21.12.0nb1
 python39-3.9.9nb2 qt5-qtbase-5.15.2nb8 qt5-qtx11extras-5.15.2nb3
 qt5-qtxmlpatterns-5.15.2nb3 ruby27-atk-3.4.9nb1
 ruby27-cairo-gobject-3.4.9nb1 ruby27-diva-2.0.1
 ruby27-gdk3-3.4.9nb1 ruby27-gdk_pixbuf2-3.4.9nb1
 ruby27-gio2-3.4.9nb1 ruby27-glib2-3.4.9nb1
 ruby27-gobject-introspection-3.4.9nb1 ruby27-gtk3-3.4.9nb1
 ruby27-mikutter-5.0.2 ruby27-mikutter-plugins-twitter-5.0
 ruby27-nokogiri-1.12.5nb2 ruby27-pango-3.4.9nb1
 ruby27-pluggaloid-1.7.0 shared-mime-info-1.10nb5
 tcsh-6.23.02 uim-1.8.9pre20210104nb2
 wayland-1.18.0nb4 wayland-protocols-1.20nb1
 wget-1.21.2nb2

RPI4 status:
- boot via UEFI_VER=v1.32
 https://github.com/pftf/RPi4/releases

In this image,pre-setted RPI_EFI.fd
 Advanced Configration
 -> Limit RAM to 3GB	Disabled

- HDMI: works
- audio: vcaudio
  http://mail-index.netbsd.org/source-changes-d/2021/01/22/msg013133.html
- USB device: works
- bwfm0 Wireless network:?
  (works well on RPI3,not works on RPI4?)
- Pi 4 Bootloader Configuration
  https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md

Update:
- NetBSD-current 9.99.93 evbarm-aarch64 202201141100Z arm64.img from nyftp.
- pkginfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo
- sysinfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo

Update from 20221-06:
https://github.com/ebijun/NetBSD/commit/1b3ef330ecf023aa73d58ccb8b4029c520f33cdf

- mate/firefox/inkscape/libreoffice works well
   pkg_add mate
   pkg_add gvfs
   pkg_add firefox
   pkg_add firefox-l10n
   pkg_add libreoffice
   pkg_add inkscape
   pkg_add gimp
   pkg_add scribus
   pkg_add py38-sphinx
   pkg_add wxGTK30
   pkg_add gnome-keyring

- Sphinx with latexpdf
  https://github.com/ebijun/NetBSD/blob/master/Guide/latexpdf.rst 

- pkgin: upgrade failed
- raspberry-pi userland: compile failed 

Pre-installed packages:
  bash
  tcsh
  vlgothic-ttf
  icewm
  xli
  ruby27-mikutter
  uim
  fossil
  sudo
  git-base
  zsh
  mlterm
  pkg_chk
  lintpkgsrc
  mozilla-rootcerts
  dillo
  medit
  lrzsz

- pre-build packages:
  See /etc/pkg_install.conf
  PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022/

pkgsrc: 
  # cd /usr
  # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz
  # ls /usr/pkgsrc                ... check if exists.
  # tar tzvf pkgsrc.tar.gz |head  ... check the archive
  # tar xzvf pkgsrc.tar.gz        ... extract
  # ls /usr/pkgsrc                ... check what extracted
  # pkg_chk -g                    ... List to/usr/pkgsrc/pkgchk.conf
  # (cd /usr/pkgsrc;cvs update -PAd) ... update
  # pkg_chk -un                   ... Update (listup)
  # pkg_chk -u                    ... Update

EEPROM verson:
 Check&update with Raspberry Pi OS (pi:raspberry)
 pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update 
 FIRMWARE_RELEASE_STATUS="stable"
 pi@raspberrypi:~ $ sudo rpi-eeprom-update
 BCM2711 detected
 Dedicated VL805 EEPROM detected
 BOOTLOADER: up-to-date
 CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 FW DIR: /lib/firmware/raspberrypi/bootloader/stable
 VL805: up-to-date
 CURRENT: 000138a1
 LATEST: 000138a1

--
Jun Ebihara