--------------------------------------------------------------------- SL-5000D Personal Mobile Tool FlashROM Image Update version 1.1x READ ME --------------------------------------------------------------------- This is the readme file of the update FlashROM image for Sharp SL-5000D Personal Mobile Tool. This document descibes the update procedure to overwrite the latest FlashROM image to the FlashROM on the SL-5000D. Note that you do not have to update the FlashROM, if your current FlashROM version is 1.1x. Click HERE to find out how to check current FlashROM version. == IMPORTANT NOTICE (WARNING) == The FlashROM update MUST BE EXECUTED BY FOLLOWING THE INSTRUCTION GIVEN BELOW. DO NOT ATTEMPT TO EXECUTE update on ANY OTHER UNITS than the applicable unit described herein, and/or DO NOT ATTEMPT TO EXECUTE update by ANY OTHER PROCESS than the process described. You must acknowledge that any other update process than descrived below, or use of the file(s) in this update archive to other device than described, may cause conflict, fault, or damage affecting the unit. SHARP strongly recommends that you keep separate permanent written records of all important data already saved on the SL-5000D before you attempt to update the FlashROM image. Data may be lost or altered in virtually any electronic memory product under certain circumstances. SHARP ASSUMES NO RESPONSIBILITY to any conflict, fault, or damage affecting the unit caused by any other update attempt not following the process given below, and SHARP's warranty shall not cover such damages. --------------------------------------------------------------------- Applicable Unit for this Update Archive --------------------------------------------------------------------- This update archive is only applicable to the SL-5000D. --------------------------------------------------------------------- Files included in the Update Archive --------------------------------------------------------------------- SL5UpdateV11x.zip is an archive file, containing following files: - readme.txt (this file) - romimage ----------------------------------------------------------------------Update Information ----------------------------------------------------------------------February 5, 2002: version 1.1x The romimage version 1.10/1.11 is the same, except that romimage version 1.11 has different heap:ramdisk allocation (26MB heap and 6MB ramdisk). Following functions and software are newly added, and or improved: - Enabled IrDA communication. - Added "Initial Setup Wizard". - Added "Voice Recorder" application. - Added "Backup/Restore" tool. - Added "Application Key" tool. - Added "Internet Wizard" tool. - Added "Beam Receive" tool. - Added "Owner Info" function. - Unified the user interface as much as possible. - Task bar to only show application currently running. - Assigned (x) button to quit application. - Assigned "Menu" key to pull up the application menu. - Changed tap and click sound. - Added keyword/first letter search function. - Added "Company" row in the "Index" view. - Font size made changable. - Added categorize/filter function. - IrDA transfer supported. - Added individual appointment view. - Added keyword search function. - Added "Company" row in the "Index" view. - Font size made changable. - IrDA transfer supported. - Added individual To-do view. - Added "Due Date" field. - Font size made changable. - IrDA transfer supported. - IMAP4 suppoted. - HTML tagged mail supported. - Folder/Query based automatic categorization. - Font size made changable. - Synchronize with Address Book. - Added stylus-scroll function. - Added cursor key control function. - Added "Direct Search" function. - Added "Slide Show". - Added categorized playlist. - Support word-wrap function. - Font size made changable. - Audio input driver implemented. - Support UTF8 by CF/SD card. - Changed memory map. (only for romimage version 1.11) - gunzip, gzip, zcat commands implemented. - telnet daemon implemented. Run Level at initial boot is set to "5", and users may not login from the serial port (as pppd for sync is working). One may be able to enter the CONSOLE ONLY mode and/or login from the serial port by: - press "/" key when "wait...." is displayed at the initial boot to show the menu. - press appropriate keys to switch to the desired mode. (e.g. "a" for console only mode, "r" to login from the serial port.) --------------------------------------------------------------------- FlashROM Update Sequence --------------------------------------------------------------------- Following is the sequences to update the SL-5000 FlashROM to the latest FlashROM image. MAKE SURE YOU FOLLOW THE INSTRUCTION BELOW STEP BY STEP. 1. For the FlashROM update, CF memory card (32MB or more) is used. You must prepare a CF card in order to update the FlashROM. The CF card must be formated by FAT16, or must not be re-formatted from the default format (since purchased.) SHARP recommends that you make sure the prepared CF card is correctly recognized by the SL-5000D before you atempt to update the FlashROM. In order to confirm; - insert the CF card, - invoke "File Manager" application, - change the directory to /var/mnt/cf/ (After invoking "File Manager", tap "upper arrow" icon twice to change directory to /root/, and then tap respective directory icon.) If you see "NotAvailable", the CF card cannot be used. 2. Make sure to take back-up of important data onto your PC by using PC synchronize software before you start FlashROM update. Data will be lost or altered during the update process. For PC-synchronize software operation, please refer to the operation manual of the respective PC synchronize software. Operation manuals can be obtained from Operation Manual. 3. Once you take back-up of all important data from your SL-5000D, turn off the SL-5000D. 4. In order to extract the downloaded archive on your PC, create a folder, (such as c:\tmp), copy the downloaded archive, and simply execute. Once executed, you will find "romimage" file. Copy the "romimage" file to the root directory of the CF Card. Make sure to remove all other files from the root directory of the CF card. 5. Insert the CF Card to SL-5000D properly. 6. Make sure that AC adapter is connected to the SL-5000D, and is actually power supplied. IMPORTANT NOTICE (WARNING) MAKE SURE TO USE AC ADAPTER TO UPDATE THE FLASHROM. WHEN CONNECTED, THE ORANGE LED ON THE DEVICE WILL TURN ON. Note that If the AC adapter is not used, the device will not perform as expected in the following instruction. 7. Open the battery compartment lid. Make sure you DO NOT take battery out. 8. While pressing [C] and [D] keys, push "FULL RESET" button once. "FULL RESET" button is located on the lower right side of the battery compartment. 9. When successfully pressed, the green LED (with "mail" symbol print) and orange LED (with "battery" symbol print) will turn on. When these LEDs are turned on, the update program starts. IMPORTANT NOTICE (WARNING) DO NOT ABORT, or UNPLUG AC ADAPTER WHILE LEDs ARE ON. Aborting or unplugging AC adapter during the update may cause fault, or damage affecting the SL-5000D. If the orange LED did not turn on, while the green LED is on, the AC adapter may not be conected properly. If this status happens, WAIT TILL THE GREEN LED GOES OFF, and DO NOT push FULL RESET button while green LED is on. ABORTING the update by pushing FULL RESET button while green LED is on willcause a serious fault, or damage that affects the SL-5000D. 10. In approx. 3 minutes, the LEDs will turn off. When turned off, FlashROM update program is now completed. 11. Pull out the CF card, and push "FULL RESET" button. 12. Close the battery compartment lid, and slide the battery replacement switch to "NORMAL OPERATION". 13. Press On/Off button to power on the SL-5000D. The updated system now starts. --------------------------------------------------------------------- Checking the FlashROM Version --------------------------------------------------------------------- Following is the sequences to check the FlashROM version on your SL-5000D: 1. Turn on your SL-5000D. 2. From "Applications" Tab, tap "System Info" icon and invoke the application. 3. When "System Info" application is invoked, tap "Version" tab. 4. On "Linux Kernel" section, you will find your FlashROM version, shown as: ROM Version: 1.1x --------------------------------------------------------------------- Trouble Shooting --------------------------------------------------------------------- (problem) The orange LED will trun on, but the green LED will not, even pressed RESET button while pressing [C] and [D] key. (answer) CASE 1: OS will boot, and LED will not turn on. Make sure to only press [C] and [D] key when you press FULL RESET button. Update program will not be invoked if the other keys are pressed. CASE 2: OS will not boot, yet LED will not turn on. Make sure the CF card is inserted properly. Remove the battery, and leave the device for a several minutes. After leaving device, re-insert the battery and the CF card properly, and try the update process again.