/* $NetBSD: usbdi.c,v 1.182.4.6 2024/03/12 12:34:50 martin Exp $ */ /* * Copyright (c) 1998, 2012, 2015 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net) at * Carlstedt Research & Technology, Matthew R. Green (mrg@eterna.com.au), * and Nick Hudson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: usbdi.c,v 1.182.4.6 2024/03/12 12:34:50 martin Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #include "opt_compat_netbsd.h" #include "usb_dma.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* UTF-8 encoding stuff */ #include extern int usbdebug; Static usbd_status usbd_ar_pipe(struct usbd_pipe *); Static void usbd_start_next(struct usbd_pipe *); Static usbd_status usbd_open_pipe_ival (struct usbd_interface *, uint8_t, uint8_t, struct usbd_pipe **, int); static void *usbd_alloc_buffer(struct usbd_xfer *, uint32_t); static void usbd_free_buffer(struct usbd_xfer *); static struct usbd_xfer *usbd_alloc_xfer(struct usbd_device *, unsigned int); static usbd_status usbd_free_xfer(struct usbd_xfer *); static void usbd_request_async_cb(struct usbd_xfer *, void *, usbd_status); static void usbd_xfer_timeout(void *); static void usbd_xfer_timeout_task(void *); static bool usbd_xfer_probe_timeout(struct usbd_xfer *); static void usbd_xfer_cancel_timeout_async(struct usbd_xfer *); #if defined(USB_DEBUG) void usbd_dump_iface(struct usbd_interface *iface) { USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "iface %#jx", (uintptr_t)iface, 0, 0, 0); if (iface == NULL) return; USBHIST_LOG(usbdebug, " device = %#jx idesc = %#jx index = %d", (uintptr_t)iface->ui_dev, (uintptr_t)iface->ui_idesc, iface->ui_index, 0); USBHIST_LOG(usbdebug, " altindex=%d priv=%#jx", iface->ui_altindex, (uintptr_t)iface->ui_priv, 0, 0); } void usbd_dump_device(struct usbd_device *dev) { USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "dev = %#jx", (uintptr_t)dev, 0, 0, 0); if (dev == NULL) return; USBHIST_LOG(usbdebug, " bus = %#jx default_pipe = %#jx", (uintptr_t)dev->ud_bus, (uintptr_t)dev->ud_pipe0, 0, 0); USBHIST_LOG(usbdebug, " address = %jd config = %jd depth = %jd ", dev->ud_addr, dev->ud_config, dev->ud_depth, 0); USBHIST_LOG(usbdebug, " speed = %jd self_powered = %jd " "power = %jd langid = %jd", dev->ud_speed, dev->ud_selfpowered, dev->ud_power, dev->ud_langid); } void usbd_dump_endpoint(struct usbd_endpoint *endp) { USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "endp = %#jx", (uintptr_t)endp, 0, 0, 0); if (endp == NULL) return; USBHIST_LOG(usbdebug, " edesc = %#jx refcnt = %jd", (uintptr_t)endp->ue_edesc, endp->ue_refcnt, 0, 0); if (endp->ue_edesc) USBHIST_LOG(usbdebug, " bEndpointAddress=0x%02x", endp->ue_edesc->bEndpointAddress, 0, 0, 0); } void usbd_dump_queue(struct usbd_pipe *pipe) { struct usbd_xfer *xfer; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "pipe = %#jx", (uintptr_t)pipe, 0, 0, 0); SIMPLEQ_FOREACH(xfer, &pipe->up_queue, ux_next) { USBHIST_LOG(usbdebug, " xfer = %#jx", (uintptr_t)xfer, 0, 0, 0); } } void usbd_dump_pipe(struct usbd_pipe *pipe) { USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "pipe = %#jx", (uintptr_t)pipe, 0, 0, 0); if (pipe == NULL) return; usbd_dump_iface(pipe->up_iface); usbd_dump_device(pipe->up_dev); usbd_dump_endpoint(pipe->up_endpoint); USBHIST_LOG(usbdebug, "(usbd_dump_pipe)", 0, 0, 0, 0); USBHIST_LOG(usbdebug, " running = %jd aborting = %jd", pipe->up_running, pipe->up_aborting, 0, 0); USBHIST_LOG(usbdebug, " intrxfer = %#jx, repeat = %jd, " "interval = %jd", (uintptr_t)pipe->up_intrxfer, pipe->up_repeat, pipe->up_interval, 0); } #endif usbd_status usbd_open_pipe(struct usbd_interface *iface, uint8_t address, uint8_t flags, struct usbd_pipe **pipe) { return (usbd_open_pipe_ival(iface, address, flags, pipe, USBD_DEFAULT_INTERVAL)); } usbd_status usbd_open_pipe_ival(struct usbd_interface *iface, uint8_t address, uint8_t flags, struct usbd_pipe **pipe, int ival) { struct usbd_pipe *p; struct usbd_endpoint *ep; usbd_status err; int i; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "iface = %#jx address = 0x%jx flags = 0x%jx", (uintptr_t)iface, address, flags, 0); for (i = 0; i < iface->ui_idesc->bNumEndpoints; i++) { ep = &iface->ui_endpoints[i]; if (ep->ue_edesc == NULL) return USBD_IOERROR; if (ep->ue_edesc->bEndpointAddress == address) goto found; } return USBD_BAD_ADDRESS; found: if ((flags & USBD_EXCLUSIVE_USE) && ep->ue_refcnt != 0) return USBD_IN_USE; err = usbd_setup_pipe_flags(iface->ui_dev, iface, ep, ival, &p, flags); if (err) return err; LIST_INSERT_HEAD(&iface->ui_pipes, p, up_next); *pipe = p; return USBD_NORMAL_COMPLETION; } usbd_status usbd_open_pipe_intr(struct usbd_interface *iface, uint8_t address, uint8_t flags, struct usbd_pipe **pipe, void *priv, void *buffer, uint32_t len, usbd_callback cb, int ival) { usbd_status err; struct usbd_xfer *xfer; struct usbd_pipe *ipipe; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "address = 0x%jx flags = 0x%jx len = %jd", address, flags, len, 0); err = usbd_open_pipe_ival(iface, address, USBD_EXCLUSIVE_USE | (flags & USBD_MPSAFE), &ipipe, ival); if (err) return err; err = usbd_create_xfer(ipipe, len, flags, 0, &xfer); if (err) goto bad1; usbd_setup_xfer(xfer, priv, buffer, len, flags, USBD_NO_TIMEOUT, cb); ipipe->up_intrxfer = xfer; ipipe->up_repeat = 1; err = usbd_transfer(xfer); *pipe = ipipe; if (err != USBD_IN_PROGRESS) goto bad3; return USBD_NORMAL_COMPLETION; bad3: ipipe->up_intrxfer = NULL; ipipe->up_repeat = 0; usbd_destroy_xfer(xfer); bad1: usbd_close_pipe(ipipe); return err; } usbd_status usbd_close_pipe(struct usbd_pipe *pipe) { USBHIST_FUNC(); USBHIST_CALLED(usbdebug); KASSERT(pipe != NULL); usbd_lock_pipe(pipe); if (!SIMPLEQ_EMPTY(&pipe->up_queue)) { printf("WARNING: pipe closed with active xfers on addr %d\n", pipe->up_dev->ud_addr); usbd_ar_pipe(pipe); } KASSERT(SIMPLEQ_EMPTY(&pipe->up_queue)); LIST_REMOVE(pipe, up_next); pipe->up_endpoint->ue_refcnt--; pipe->up_methods->upm_close(pipe); if (pipe->up_intrxfer != NULL) { usbd_unlock_pipe(pipe); usbd_destroy_xfer(pipe->up_intrxfer); usbd_lock_pipe(pipe); } usbd_unlock_pipe(pipe); kmem_free(pipe, pipe->up_dev->ud_bus->ub_pipesize); return USBD_NORMAL_COMPLETION; } usbd_status usbd_transfer(struct usbd_xfer *xfer) { struct usbd_pipe *pipe = xfer->ux_pipe; usbd_status err; unsigned int size, flags; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "xfer = %#jx, flags = %#jx, pipe = %#jx, running = %jd", (uintptr_t)xfer, xfer->ux_flags, (uintptr_t)pipe, pipe->up_running); KASSERT(xfer->ux_status == USBD_NOT_STARTED); #ifdef USB_DEBUG if (usbdebug > 5) usbd_dump_queue(pipe); #endif xfer->ux_done = 0; if (pipe->up_aborting) { USBHIST_LOG(usbdebug, "<- done xfer %#jx, aborting", (uintptr_t)xfer, 0, 0, 0); return USBD_CANCELLED; } KASSERT(xfer->ux_length == 0 || xfer->ux_buf != NULL); size = xfer->ux_length; flags = xfer->ux_flags; if (size != 0) { /* * Use the xfer buffer if none specified in transfer setup. * isoc transfers always use the xfer buffer, i.e. * ux_buffer is always NULL for isoc. */ if (xfer->ux_buffer == NULL) { xfer->ux_buffer = xfer->ux_buf; } /* * If not using the xfer buffer copy data to the * xfer buffer for OUT transfers of >0 length */ if (xfer->ux_buffer != xfer->ux_buf) { KASSERT(xfer->ux_buf); if (!usbd_xfer_isread(xfer)) { memcpy(xfer->ux_buf, xfer->ux_buffer, size); } } } /* xfer is not valid after the transfer method unless synchronous */ err = pipe->up_methods->upm_transfer(xfer); if (err != USBD_IN_PROGRESS && err) { /* * The transfer made it onto the pipe queue, but didn't get * accepted by the HCD for some reason. It needs removing * from the pipe queue. */ USBHIST_LOG(usbdebug, "xfer failed: %s, reinserting", err, 0, 0, 0); usbd_lock_pipe(pipe); #ifdef DIAGNOSTIC xfer->ux_state = XFER_BUSY; #endif SIMPLEQ_REMOVE_HEAD(&pipe->up_queue, ux_next); if (pipe->up_serialise) usbd_start_next(pipe); usbd_unlock_pipe(pipe); } if (!(flags & USBD_SYNCHRONOUS)) { USBHIST_LOG(usbdebug, "<- done xfer %#jx, not sync (err %jd)", (uintptr_t)xfer, err, 0, 0); return err; } if (err != USBD_IN_PROGRESS) { USBHIST_LOG(usbdebug, "<- done xfer %#jx, sync (err %jd)", (uintptr_t)xfer, err, 0, 0); return err; } /* Sync transfer, wait for completion. */ usbd_lock_pipe(pipe); while (!xfer->ux_done) { if (pipe->up_dev->ud_bus->ub_usepolling) panic("usbd_transfer: not done"); USBHIST_LOG(usbdebug, "<- sleeping on xfer %#jx", (uintptr_t)xfer, 0, 0, 0); err = 0; if ((flags & USBD_SYNCHRONOUS_SIG) != 0) { err = cv_wait_sig(&xfer->ux_cv, pipe->up_dev->ud_bus->ub_lock); } else { cv_wait(&xfer->ux_cv, pipe->up_dev->ud_bus->ub_lock); } if (err) { if (!xfer->ux_done) pipe->up_methods->upm_abort(xfer); break; } } usbd_unlock_pipe(pipe); return xfer->ux_status; } /* Like usbd_transfer(), but waits for completion. */ usbd_status usbd_sync_transfer(struct usbd_xfer *xfer) { xfer->ux_flags |= USBD_SYNCHRONOUS; return usbd_transfer(xfer); } /* Like usbd_transfer(), but waits for completion and listens for signals. */ usbd_status usbd_sync_transfer_sig(struct usbd_xfer *xfer) { xfer->ux_flags |= USBD_SYNCHRONOUS | USBD_SYNCHRONOUS_SIG; return usbd_transfer(xfer); } static void * usbd_alloc_buffer(struct usbd_xfer *xfer, uint32_t size) { KASSERT(xfer->ux_buf == NULL); KASSERT(size != 0); xfer->ux_bufsize = 0; #if NUSB_DMA > 0 struct usbd_bus *bus = xfer->ux_bus; if (bus->ub_usedma) { usb_dma_t *dmap = &xfer->ux_dmabuf; int err = usb_allocmem_flags(bus, size, 0, dmap, bus->ub_dmaflags); if (err) { return NULL; } xfer->ux_buf = KERNADDR(&xfer->ux_dmabuf, 0); xfer->ux_bufsize = size; return xfer->ux_buf; } #endif KASSERT(xfer->ux_bus->ub_usedma == false); xfer->ux_buf = kmem_alloc(size, KM_SLEEP); xfer->ux_bufsize = size; return xfer->ux_buf; } static void usbd_free_buffer(struct usbd_xfer *xfer) { KASSERT(xfer->ux_buf != NULL); KASSERT(xfer->ux_bufsize != 0); void *buf = xfer->ux_buf; uint32_t size = xfer->ux_bufsize; xfer->ux_buf = NULL; xfer->ux_bufsize = 0; #if NUSB_DMA > 0 struct usbd_bus *bus = xfer->ux_bus; if (bus->ub_usedma) { usb_dma_t *dmap = &xfer->ux_dmabuf; usb_freemem(bus, dmap); return; } #endif KASSERT(xfer->ux_bus->ub_usedma == false); kmem_free(buf, size); } void * usbd_get_buffer(struct usbd_xfer *xfer) { return xfer->ux_buf; } struct usbd_pipe * usbd_get_pipe0(struct usbd_device *dev) { return dev->ud_pipe0; } static struct usbd_xfer * usbd_alloc_xfer(struct usbd_device *dev, unsigned int nframes) { struct usbd_xfer *xfer; USBHIST_FUNC(); ASSERT_SLEEPABLE(); xfer = dev->ud_bus->ub_methods->ubm_allocx(dev->ud_bus, nframes); if (xfer == NULL) goto out; xfer->ux_bus = dev->ud_bus; callout_init(&xfer->ux_callout, CALLOUT_MPSAFE); callout_setfunc(&xfer->ux_callout, usbd_xfer_timeout, xfer); cv_init(&xfer->ux_cv, "usbxfer"); usb_init_task(&xfer->ux_aborttask, usbd_xfer_timeout_task, xfer, USB_TASKQ_MPSAFE); out: USBHIST_CALLARGS(usbdebug, "returns %#jx", (uintptr_t)xfer, 0, 0, 0); return xfer; } static usbd_status usbd_free_xfer(struct usbd_xfer *xfer) { USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "%#jx", (uintptr_t)xfer, 0, 0, 0); if (xfer->ux_buf) { usbd_free_buffer(xfer); } /* Wait for any straggling timeout to complete. */ mutex_enter(xfer->ux_bus->ub_lock); xfer->ux_timeout_reset = false; /* do not resuscitate */ callout_halt(&xfer->ux_callout, xfer->ux_bus->ub_lock); usb_rem_task_wait(xfer->ux_pipe->up_dev, &xfer->ux_aborttask, USB_TASKQ_HC, xfer->ux_bus->ub_lock); mutex_exit(xfer->ux_bus->ub_lock); cv_destroy(&xfer->ux_cv); xfer->ux_bus->ub_methods->ubm_freex(xfer->ux_bus, xfer); return USBD_NORMAL_COMPLETION; } int usbd_create_xfer(struct usbd_pipe *pipe, size_t len, unsigned int flags, unsigned int nframes, struct usbd_xfer **xp) { KASSERT(xp != NULL); void *buf = NULL; struct usbd_xfer *xfer = usbd_alloc_xfer(pipe->up_dev, nframes); if (xfer == NULL) return ENOMEM; xfer->ux_pipe = pipe; xfer->ux_flags = flags; xfer->ux_nframes = nframes; xfer->ux_methods = pipe->up_methods; if (len) { buf = usbd_alloc_buffer(xfer, len); if (!buf) { usbd_free_xfer(xfer); return ENOMEM; } } if (xfer->ux_methods->upm_init) { int err = xfer->ux_methods->upm_init(xfer); if (err) { usbd_free_xfer(xfer); return err; } } *xp = xfer; return 0; } void usbd_destroy_xfer(struct usbd_xfer *xfer) { if (xfer->ux_methods->upm_fini) { xfer->ux_methods->upm_fini(xfer); } usbd_free_xfer(xfer); } void usbd_setup_xfer(struct usbd_xfer *xfer, void *priv, void *buffer, uint32_t length, uint16_t flags, uint32_t timeout, usbd_callback callback) { KASSERT(xfer->ux_pipe); xfer->ux_priv = priv; xfer->ux_buffer = buffer; xfer->ux_length = length; xfer->ux_actlen = 0; xfer->ux_flags = flags; xfer->ux_timeout = timeout; xfer->ux_status = USBD_NOT_STARTED; xfer->ux_callback = callback; xfer->ux_rqflags &= ~URQ_REQUEST; xfer->ux_nframes = 0; } void usbd_setup_default_xfer(struct usbd_xfer *xfer, struct usbd_device *dev, void *priv, uint32_t timeout, usb_device_request_t *req, void *buffer, uint32_t length, uint16_t flags, usbd_callback callback) { KASSERT(xfer->ux_pipe == dev->ud_pipe0); xfer->ux_priv = priv; xfer->ux_buffer = buffer; xfer->ux_length = length; xfer->ux_actlen = 0; xfer->ux_flags = flags; xfer->ux_timeout = timeout; xfer->ux_status = USBD_NOT_STARTED; xfer->ux_callback = callback; xfer->ux_request = *req; xfer->ux_rqflags |= URQ_REQUEST; xfer->ux_nframes = 0; } void usbd_setup_isoc_xfer(struct usbd_xfer *xfer, void *priv, uint16_t *frlengths, uint32_t nframes, uint16_t flags, usbd_callback callback) { xfer->ux_priv = priv; xfer->ux_buffer = NULL; xfer->ux_length = 0; xfer->ux_actlen = 0; xfer->ux_flags = flags; xfer->ux_timeout = USBD_NO_TIMEOUT; xfer->ux_status = USBD_NOT_STARTED; xfer->ux_callback = callback; xfer->ux_rqflags &= ~URQ_REQUEST; xfer->ux_frlengths = frlengths; xfer->ux_nframes = nframes; } void usbd_get_xfer_status(struct usbd_xfer *xfer, void **priv, void **buffer, uint32_t *count, usbd_status *status) { if (priv != NULL) *priv = xfer->ux_priv; if (buffer != NULL) *buffer = xfer->ux_buffer; if (count != NULL) *count = xfer->ux_actlen; if (status != NULL) *status = xfer->ux_status; } usb_config_descriptor_t * usbd_get_config_descriptor(struct usbd_device *dev) { KASSERT(dev != NULL); return dev->ud_cdesc; } usb_interface_descriptor_t * usbd_get_interface_descriptor(struct usbd_interface *iface) { KASSERT(iface != NULL); return iface->ui_idesc; } usb_device_descriptor_t * usbd_get_device_descriptor(struct usbd_device *dev) { KASSERT(dev != NULL); return &dev->ud_ddesc; } usb_endpoint_descriptor_t * usbd_interface2endpoint_descriptor(struct usbd_interface *iface, uint8_t index) { if (index >= iface->ui_idesc->bNumEndpoints) return NULL; return iface->ui_endpoints[index].ue_edesc; } /* Some drivers may wish to abort requests on the default pipe, * * but there is no mechanism for getting a handle on it. */ usbd_status usbd_abort_default_pipe(struct usbd_device *device) { return usbd_abort_pipe(device->ud_pipe0); } usbd_status usbd_abort_pipe(struct usbd_pipe *pipe) { usbd_status err; KASSERT(pipe != NULL); usbd_lock_pipe(pipe); err = usbd_ar_pipe(pipe); usbd_unlock_pipe(pipe); return err; } usbd_status usbd_clear_endpoint_stall(struct usbd_pipe *pipe) { struct usbd_device *dev = pipe->up_dev; usb_device_request_t req; usbd_status err; USBHIST_FUNC(); USBHIST_CALLED(usbdebug); /* * Clearing en endpoint stall resets the endpoint toggle, so * do the same to the HC toggle. */ pipe->up_methods->upm_cleartoggle(pipe); req.bmRequestType = UT_WRITE_ENDPOINT; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, UF_ENDPOINT_HALT); USETW(req.wIndex, pipe->up_endpoint->ue_edesc->bEndpointAddress); USETW(req.wLength, 0); err = usbd_do_request(dev, &req, 0); #if 0 XXX should we do this? if (!err) { pipe->state = USBD_PIPE_ACTIVE; /* XXX activate pipe */ } #endif return err; } void usbd_clear_endpoint_stall_task(void *arg) { struct usbd_pipe *pipe = arg; struct usbd_device *dev = pipe->up_dev; usb_device_request_t req; pipe->up_methods->upm_cleartoggle(pipe); req.bmRequestType = UT_WRITE_ENDPOINT; req.bRequest = UR_CLEAR_FEATURE; USETW(req.wValue, UF_ENDPOINT_HALT); USETW(req.wIndex, pipe->up_endpoint->ue_edesc->bEndpointAddress); USETW(req.wLength, 0); (void)usbd_do_request(dev, &req, 0); } void usbd_clear_endpoint_stall_async(struct usbd_pipe *pipe) { usb_add_task(pipe->up_dev, &pipe->up_async_task, USB_TASKQ_DRIVER); } void usbd_clear_endpoint_toggle(struct usbd_pipe *pipe) { pipe->up_methods->upm_cleartoggle(pipe); } usbd_status usbd_endpoint_count(struct usbd_interface *iface, uint8_t *count) { KASSERT(iface != NULL); KASSERT(iface->ui_idesc != NULL); *count = iface->ui_idesc->bNumEndpoints; return USBD_NORMAL_COMPLETION; } usbd_status usbd_interface_count(struct usbd_device *dev, uint8_t *count) { if (dev->ud_cdesc == NULL) return USBD_NOT_CONFIGURED; *count = dev->ud_cdesc->bNumInterface; return USBD_NORMAL_COMPLETION; } void usbd_interface2device_handle(struct usbd_interface *iface, struct usbd_device **dev) { *dev = iface->ui_dev; } usbd_status usbd_device2interface_handle(struct usbd_device *dev, uint8_t ifaceno, struct usbd_interface **iface) { if (dev->ud_cdesc == NULL) return USBD_NOT_CONFIGURED; if (ifaceno >= dev->ud_cdesc->bNumInterface) return USBD_INVAL; *iface = &dev->ud_ifaces[ifaceno]; return USBD_NORMAL_COMPLETION; } struct usbd_device * usbd_pipe2device_handle(struct usbd_pipe *pipe) { KASSERT(pipe != NULL); return pipe->up_dev; } /* XXXX use altno */ usbd_status usbd_set_interface(struct usbd_interface *iface, int altidx) { usb_device_request_t req; usbd_status err; void *endpoints; USBHIST_FUNC(); if (LIST_FIRST(&iface->ui_pipes) != NULL) return USBD_IN_USE; endpoints = iface->ui_endpoints; int nendpt = iface->ui_idesc->bNumEndpoints; USBHIST_CALLARGS(usbdebug, "iface %#jx endpoints = %#jx nendpt %jd", (uintptr_t)iface, (uintptr_t)endpoints, iface->ui_idesc->bNumEndpoints, 0); err = usbd_fill_iface_data(iface->ui_dev, iface->ui_index, altidx); if (err) return err; /* new setting works, we can free old endpoints */ if (endpoints != NULL) { USBHIST_LOG(usbdebug, "iface %#jx endpoints = %#jx nendpt %jd", (uintptr_t)iface, (uintptr_t)endpoints, nendpt, 0); kmem_free(endpoints, nendpt * sizeof(struct usbd_endpoint)); } KASSERT(iface->ui_idesc != NULL); req.bmRequestType = UT_WRITE_INTERFACE; req.bRequest = UR_SET_INTERFACE; USETW(req.wValue, iface->ui_idesc->bAlternateSetting); USETW(req.wIndex, iface->ui_idesc->bInterfaceNumber); USETW(req.wLength, 0); return usbd_do_request(iface->ui_dev, &req, 0); } int usbd_get_no_alts(usb_config_descriptor_t *cdesc, int ifaceno) { char *p = (char *)cdesc; char *end = p + UGETW(cdesc->wTotalLength); usb_interface_descriptor_t *d; int n; for (n = 0; p < end; p += d->bLength) { d = (usb_interface_descriptor_t *)p; if (p + d->bLength <= end && d->bDescriptorType == UDESC_INTERFACE && d->bInterfaceNumber == ifaceno) n++; } return n; } int usbd_get_interface_altindex(struct usbd_interface *iface) { return iface->ui_altindex; } usbd_status usbd_get_interface(struct usbd_interface *iface, uint8_t *aiface) { usb_device_request_t req; req.bmRequestType = UT_READ_INTERFACE; req.bRequest = UR_GET_INTERFACE; USETW(req.wValue, 0); USETW(req.wIndex, iface->ui_idesc->bInterfaceNumber); USETW(req.wLength, 1); return usbd_do_request(iface->ui_dev, &req, aiface); } /*** Internal routines ***/ /* Dequeue all pipe operations, called with bus lock held. */ Static usbd_status usbd_ar_pipe(struct usbd_pipe *pipe) { struct usbd_xfer *xfer; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "pipe = %#jx", (uintptr_t)pipe, 0, 0, 0); KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock)); #ifdef USB_DEBUG if (usbdebug > 5) usbd_dump_queue(pipe); #endif pipe->up_repeat = 0; pipe->up_running = 0; pipe->up_aborting = 1; while ((xfer = SIMPLEQ_FIRST(&pipe->up_queue)) != NULL) { USBHIST_LOG(usbdebug, "pipe = %#jx xfer = %#jx " "(methods = %#jx)", (uintptr_t)pipe, (uintptr_t)xfer, (uintptr_t)pipe->up_methods, 0); if (xfer->ux_status == USBD_NOT_STARTED) { #ifdef DIAGNOSTIC xfer->ux_state = XFER_BUSY; #endif SIMPLEQ_REMOVE_HEAD(&pipe->up_queue, ux_next); } else { /* Make the HC abort it (and invoke the callback). */ pipe->up_methods->upm_abort(xfer); /* XXX only for non-0 usbd_clear_endpoint_stall(pipe); */ } } pipe->up_aborting = 0; return USBD_NORMAL_COMPLETION; } /* Called with USB lock held. */ void usb_transfer_complete(struct usbd_xfer *xfer) { struct usbd_pipe *pipe = xfer->ux_pipe; struct usbd_bus *bus = pipe->up_dev->ud_bus; int sync = xfer->ux_flags & USBD_SYNCHRONOUS; int erred; int polling = bus->ub_usepolling; int repeat = pipe->up_repeat; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "pipe = %#jx xfer = %#jx status = %jd " "actlen = %jd", (uintptr_t)pipe, (uintptr_t)xfer, xfer->ux_status, xfer->ux_actlen); KASSERT(polling || mutex_owned(pipe->up_dev->ud_bus->ub_lock)); KASSERTMSG(xfer->ux_state == XFER_ONQU, "xfer %p state is %x", xfer, xfer->ux_state); KASSERT(pipe != NULL); /* * If device is known to miss out ack, then pretend that * output timeout is a success. Userland should handle * the logic to verify that the operation succeeded. */ if (pipe->up_dev->ud_quirks && pipe->up_dev->ud_quirks->uq_flags & UQ_MISS_OUT_ACK && xfer->ux_status == USBD_TIMEOUT && !usbd_xfer_isread(xfer)) { USBHIST_LOG(usbdebug, "Possible output ack miss for xfer %#jx: " "hiding write timeout to %d.%s for %d bytes written", (uintptr_t)xfer, curlwp->l_proc->p_pid, curlwp->l_lid, xfer->ux_length); xfer->ux_status = USBD_NORMAL_COMPLETION; xfer->ux_actlen = xfer->ux_length; } erred = xfer->ux_status == USBD_CANCELLED || xfer->ux_status == USBD_TIMEOUT; if (!repeat) { /* Remove request from queue. */ KASSERTMSG(!SIMPLEQ_EMPTY(&pipe->up_queue), "pipe %p is empty, but xfer %p wants to complete", pipe, xfer); KASSERTMSG(xfer == SIMPLEQ_FIRST(&pipe->up_queue), "xfer %p is not start of queue (%p is at start)", xfer, SIMPLEQ_FIRST(&pipe->up_queue)); #ifdef DIAGNOSTIC xfer->ux_state = XFER_BUSY; #endif SIMPLEQ_REMOVE_HEAD(&pipe->up_queue, ux_next); } USBHIST_LOG(usbdebug, "xfer %#jx: repeat %jd new head = %#jx", (uintptr_t)xfer, repeat, (uintptr_t)SIMPLEQ_FIRST(&pipe->up_queue), 0); /* Count completed transfers. */ ++pipe->up_dev->ud_bus->ub_stats.uds_requests [pipe->up_endpoint->ue_edesc->bmAttributes & UE_XFERTYPE]; xfer->ux_done = 1; if (!xfer->ux_status && xfer->ux_actlen < xfer->ux_length && !(xfer->ux_flags & USBD_SHORT_XFER_OK)) { USBHIST_LOG(usbdebug, "short transfer %jd < %jd", xfer->ux_actlen, xfer->ux_length, 0, 0); xfer->ux_status = USBD_SHORT_XFER; } USBHIST_LOG(usbdebug, "xfer %#jx doing done %#jx", (uintptr_t)xfer, (uintptr_t)pipe->up_methods->upm_done, 0, 0); pipe->up_methods->upm_done(xfer); if (xfer->ux_length != 0 && xfer->ux_buffer != xfer->ux_buf) { KDASSERTMSG(xfer->ux_actlen <= xfer->ux_length, "actlen %d length %d",xfer->ux_actlen, xfer->ux_length); /* Only if IN transfer */ if (usbd_xfer_isread(xfer)) { memcpy(xfer->ux_buffer, xfer->ux_buf, xfer->ux_actlen); } } USBHIST_LOG(usbdebug, "xfer %#jx doing callback %#jx status %jd", (uintptr_t)xfer, (uintptr_t)xfer->ux_callback, xfer->ux_status, 0); if (xfer->ux_callback) { if (!polling) { mutex_exit(pipe->up_dev->ud_bus->ub_lock); if (!(pipe->up_flags & USBD_MPSAFE)) KERNEL_LOCK(1, curlwp); } xfer->ux_callback(xfer, xfer->ux_priv, xfer->ux_status); if (!polling) { if (!(pipe->up_flags & USBD_MPSAFE)) KERNEL_UNLOCK_ONE(curlwp); mutex_enter(pipe->up_dev->ud_bus->ub_lock); } } if (sync && !polling) { USBHIST_LOG(usbdebug, "<- done xfer %#jx, wakeup", (uintptr_t)xfer, 0, 0, 0); cv_broadcast(&xfer->ux_cv); } if (repeat) { xfer->ux_actlen = 0; xfer->ux_status = USBD_NOT_STARTED; } else { /* XXX should we stop the queue on all errors? */ if (erred && pipe->up_iface != NULL) /* not control pipe */ pipe->up_running = 0; } if (pipe->up_running && pipe->up_serialise) usbd_start_next(pipe); } /* Called with USB lock held. */ usbd_status usb_insert_transfer(struct usbd_xfer *xfer) { struct usbd_pipe *pipe = xfer->ux_pipe; usbd_status err; USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "xfer = %#jx pipe = %#jx running = %jd timeout = %jd", (uintptr_t)xfer, (uintptr_t)pipe, pipe->up_running, xfer->ux_timeout); KASSERT(mutex_owned(pipe->up_dev->ud_bus->ub_lock)); KASSERTMSG(xfer->ux_state == XFER_BUSY, "xfer %p state is %x", xfer, xfer->ux_state); #ifdef DIAGNOSTIC xfer->ux_state = XFER_ONQU; #endif SIMPLEQ_INSERT_TAIL(&pipe->up_queue, xfer, ux_next); if (pipe->up_running && pipe->up_serialise) err = USBD_IN_PROGRESS; else { pipe->up_running = 1; err = USBD_NORMAL_COMPLETION; } USBHIST_LOG(usbdebug, "<- done xfer %#jx, err %jd", (uintptr_t)xfer, err, 0, 0); return err; } /* Called with USB lock held. */ void usbd_start_next(struct usbd_pipe *pipe) { struct usbd_xfer *xfer; usbd_status err; USBHIST_FUNC(); KASSERT(pipe != NULL); KASSERT(pipe->up_methods != NULL); KASSERT(pipe->up_methods->upm_start != NULL); KASSERT(pipe->up_serialise == true); int polling = pipe->up_dev->ud_bus->ub_usepolling; KASSERT(polling || mutex_owned(pipe->up_dev->ud_bus->ub_lock)); /* Get next request in queue. */ xfer = SIMPLEQ_FIRST(&pipe->up_queue); USBHIST_CALLARGS(usbdebug, "pipe = %#jx, xfer = %#jx", (uintptr_t)pipe, (uintptr_t)xfer, 0, 0); if (xfer == NULL) { pipe->up_running = 0; } else { if (!polling) mutex_exit(pipe->up_dev->ud_bus->ub_lock); err = pipe->up_methods->upm_start(xfer); if (!polling) mutex_enter(pipe->up_dev->ud_bus->ub_lock); if (err != USBD_IN_PROGRESS) { USBHIST_LOG(usbdebug, "error = %jd", err, 0, 0, 0); pipe->up_running = 0; /* XXX do what? */ } } KASSERT(polling || mutex_owned(pipe->up_dev->ud_bus->ub_lock)); } usbd_status usbd_do_request(struct usbd_device *dev, usb_device_request_t *req, void *data) { return usbd_do_request_flags(dev, req, data, 0, 0, USBD_DEFAULT_TIMEOUT); } usbd_status usbd_do_request_flags(struct usbd_device *dev, usb_device_request_t *req, void *data, uint16_t flags, int *actlen, uint32_t timeout) { size_t len = UGETW(req->wLength); return usbd_do_request_len(dev, req, len, data, flags, actlen, timeout); } usbd_status usbd_do_request_len(struct usbd_device *dev, usb_device_request_t *req, size_t len, void *data, uint16_t flags, int *actlen, uint32_t timeout) { struct usbd_xfer *xfer; usbd_status err; KASSERT(len >= UGETW(req->wLength)); USBHIST_FUNC(); USBHIST_CALLARGS(usbdebug, "dev=%#jx req=%jx flags=%jx len=%jx", (uintptr_t)dev, (uintptr_t)req, flags, len); ASSERT_SLEEPABLE(); int error = usbd_create_xfer(dev->ud_pipe0, len, 0, 0, &xfer); if (error) return error; usbd_setup_default_xfer(xfer, dev, 0, timeout, req, data, UGETW(req->wLength), flags, NULL); KASSERT(xfer->ux_pipe == dev->ud_pipe0); err = usbd_sync_transfer(xfer); #if defined(USB_DEBUG) || defined(DIAGNOSTIC) if (xfer->ux_actlen > xfer->ux_length) { USBHIST_LOG(usbdebug, "overrun addr = %jd type = 0x%02jx", dev->ud_addr, xfer->ux_request.bmRequestType, 0, 0); USBHIST_LOG(usbdebug, " req = 0x%02jx val = %jd " "index = %jd", xfer->ux_request.bRequest, UGETW(xfer->ux_request.wValue), UGETW(xfer->ux_request.wIndex), 0); USBHIST_LOG(usbdebug, " rlen = %jd length = %jd " "actlen = %jd", UGETW(xfer->ux_request.wLength), xfer->ux_length, xfer->ux_actlen, 0); } #endif if (actlen != NULL) *actlen = xfer->ux_actlen; usbd_destroy_xfer(xfer); if (err) { USBHIST_LOG(usbdebug, "returning err = %jd", err, 0, 0, 0); } return err; } static void usbd_request_async_cb(struct usbd_xfer *xfer, void *priv, usbd_status status) { usbd_free_xfer(xfer); } /* * Execute a request without waiting for completion. * Can be used from interrupt context. */ usbd_status usbd_request_async(struct usbd_device *dev, struct usbd_xfer *xfer, usb_device_request_t *req, void *priv, usbd_callback callback) { usbd_status err; if (callback == NULL) callback = usbd_request_async_cb; usbd_setup_default_xfer(xfer, dev, priv, USBD_DEFAULT_TIMEOUT, req, NULL, UGETW(req->wLength), 0, callback); err = usbd_transfer(xfer); if (err != USBD_IN_PROGRESS) { usbd_free_xfer(xfer); return (err); } return (USBD_NORMAL_COMPLETION); } const struct usbd_quirks * usbd_get_quirks(struct usbd_device *dev) { #ifdef DIAGNOSTIC if (dev == NULL) { printf("usbd_get_quirks: dev == NULL\n"); return 0; } #endif return dev->ud_quirks; } /* XXX do periodic free() of free list */ /* * Called from keyboard driver when in polling mode. */ void usbd_dopoll(struct usbd_interface *iface) { iface->ui_dev->ud_bus->ub_methods->ubm_dopoll(iface->ui_dev->ud_bus); } /* * This is for keyboard driver as well, which only operates in polling * mode from the ask root, etc., prompt and from DDB. */ void usbd_set_polling(struct usbd_device *dev, int on) { mutex_enter(dev->ud_bus->ub_lock); if (on) { /* * Enabling polling. If we're enabling for the first * time, call the softint routine on transition while * we hold the lock and polling is still disabled, and * then enable polling -- once polling is enabled, we * must not hold the lock when we call the softint * routine. */ KASSERT(dev->ud_bus->ub_usepolling < __type_max(char)); if (dev->ud_bus->ub_usepolling == 0) dev->ud_bus->ub_methods->ubm_softint(dev->ud_bus); dev->ud_bus->ub_usepolling++; } else { /* * Disabling polling. If we're disabling polling for * the last time, disable polling first and then call * the softint routine while we hold the lock -- until * polling is disabled, we must not hold the lock when * we call the softint routine. */ KASSERT(dev->ud_bus->ub_usepolling > 0); dev->ud_bus->ub_usepolling--; if (dev->ud_bus->ub_usepolling == 0) dev->ud_bus->ub_methods->ubm_softint(dev->ud_bus); } mutex_exit(dev->ud_bus->ub_lock); } usb_endpoint_descriptor_t * usbd_get_endpoint_descriptor(struct usbd_interface *iface, uint8_t address) { struct usbd_endpoint *ep; int i; for (i = 0; i < iface->ui_idesc->bNumEndpoints; i++) { ep = &iface->ui_endpoints[i]; if (ep->ue_edesc->bEndpointAddress == address) return iface->ui_endpoints[i].ue_edesc; } return NULL; } /* * usbd_ratecheck() can limit the number of error messages that occurs. * When a device is unplugged it may take up to 0.25s for the hub driver * to notice it. If the driver continuously tries to do I/O operations * this can generate a large number of messages. */ int usbd_ratecheck(struct timeval *last) { static struct timeval errinterval = { 0, 250000 }; /* 0.25 s*/ return ratecheck(last, &errinterval); } /* * Search for a vendor/product pair in an array. The item size is * given as an argument. */ const struct usb_devno * usb_match_device(const struct usb_devno *tbl, u_int nentries, u_int sz, uint16_t vendor, uint16_t product) { while (nentries-- > 0) { uint16_t tproduct = tbl->ud_product; if (tbl->ud_vendor == vendor && (tproduct == product || tproduct == USB_PRODUCT_ANY)) return tbl; tbl = (const struct usb_devno *)((const char *)tbl + sz); } return NULL; } void usb_desc_iter_init(struct usbd_device *dev, usbd_desc_iter_t *iter) { const usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev); iter->cur = (const uByte *)cd; iter->end = (const uByte *)cd + UGETW(cd->wTotalLength); } const usb_descriptor_t * usb_desc_iter_next(usbd_desc_iter_t *iter) { const usb_descriptor_t *desc; if (iter->cur + sizeof(usb_descriptor_t) >= iter->end) { if (iter->cur != iter->end) printf("usb_desc_iter_next: bad descriptor\n"); return NULL; } desc = (const usb_descriptor_t *)iter->cur; if (desc->bLength == 0) { printf("usb_desc_iter_next: descriptor length = 0\n"); return NULL; } iter->cur += desc->bLength; if (iter->cur > iter->end) { printf("usb_desc_iter_next: descriptor length too large\n"); return NULL; } return desc; } usbd_status usbd_get_string(struct usbd_device *dev, int si, char *buf) { return usbd_get_string0(dev, si, buf, 1); } usbd_status usbd_get_string0(struct usbd_device *dev, int si, char *buf, int unicode) { int swap = dev->ud_quirks->uq_flags & UQ_SWAP_UNICODE; usb_string_descriptor_t us; char *s; int i, n; uint16_t c; usbd_status err; int size; USBHIST_FUNC(); USBHIST_CALLED(usbdebug); buf[0] = '\0'; if (si == 0) return USBD_INVAL; if (dev->ud_quirks->uq_flags & UQ_NO_STRINGS) return USBD_STALLED; if (dev->ud_langid == USBD_NOLANG) { /* Set up default language */ err = usbd_get_string_desc(dev, USB_LANGUAGE_TABLE, 0, &us, &size); if (err || size < 4) { USBHIST_LOG(usbdebug, "getting lang failed, using 0", 0, 0, 0, 0); dev->ud_langid = 0; /* Well, just pick something then */ } else { /* Pick the first language as the default. */ dev->ud_langid = UGETW(us.bString[0]); } } err = usbd_get_string_desc(dev, si, dev->ud_langid, &us, &size); if (err) return err; s = buf; n = size / 2 - 1; if (unicode) { for (i = 0; i < n; i++) { c = UGETW(us.bString[i]); if (swap) c = (c >> 8) | (c << 8); s += wput_utf8(s, 3, c); } *s++ = 0; } #ifdef COMPAT_30 else { for (i = 0; i < n; i++) { c = UGETW(us.bString[i]); if (swap) c = (c >> 8) | (c << 8); *s++ = (c < 0x80) ? c : '?'; } *s++ = 0; } #endif return USBD_NORMAL_COMPLETION; } /* * usbd_xfer_trycomplete(xfer) * * Try to claim xfer for completion. Return true if successful, * false if the xfer has been synchronously aborted or has timed * out. * * If this returns true, caller is responsible for setting * xfer->ux_status and calling usb_transfer_complete. To be used * in a host controller interrupt handler. * * Caller must either hold the bus lock or have the bus in polling * mode. */ bool usbd_xfer_trycomplete(struct usbd_xfer *xfer) { struct usbd_bus *bus __diagused = xfer->ux_bus; KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); /* * If software has completed it, either by synchronous abort or * by timeout, too late. */ if (xfer->ux_status != USBD_IN_PROGRESS) return false; /* * We are completing the xfer. Cancel the timeout if we can, * but only asynchronously. See usbd_xfer_cancel_timeout_async * for why we need not wait for the callout or task here. */ usbd_xfer_cancel_timeout_async(xfer); /* Success! Note: Caller must set xfer->ux_status afterwar. */ return true; } /* * usbd_xfer_abort(xfer) * * Try to claim xfer to abort. If successful, mark it completed * with USBD_CANCELLED and call the bus-specific method to abort * at the hardware level. * * To be called in thread context from struct * usbd_pipe_methods::upm_abort. * * Caller must hold the bus lock. */ void usbd_xfer_abort(struct usbd_xfer *xfer) { struct usbd_bus *bus = xfer->ux_bus; KASSERT(mutex_owned(bus->ub_lock)); /* * If host controller interrupt or timer interrupt has * completed it, too late. But the xfer cannot be * cancelled already -- only one caller can synchronously * abort. */ KASSERT(xfer->ux_status != USBD_CANCELLED); if (xfer->ux_status != USBD_IN_PROGRESS) return; /* * Cancel the timeout if we can, but only asynchronously; see * usbd_xfer_cancel_timeout_async for why we need not wait for * the callout or task here. */ usbd_xfer_cancel_timeout_async(xfer); /* * We beat everyone else. Claim the status as cancelled and do * the bus-specific dance to abort the hardware. */ xfer->ux_status = USBD_CANCELLED; bus->ub_methods->ubm_abortx(xfer); } /* * usbd_xfer_timeout(xfer) * * Called at IPL_SOFTCLOCK when too much time has elapsed waiting * for xfer to complete. Since we can't abort the xfer at * IPL_SOFTCLOCK, defer to a usb_task to run it in thread context, * unless the xfer has completed or aborted concurrently -- and if * the xfer has also been resubmitted, take care of rescheduling * the callout. */ static void usbd_xfer_timeout(void *cookie) { struct usbd_xfer *xfer = cookie; struct usbd_bus *bus = xfer->ux_bus; struct usbd_device *dev = xfer->ux_pipe->up_dev; /* Acquire the lock so we can transition the timeout state. */ mutex_enter(bus->ub_lock); /* * Use usbd_xfer_probe_timeout to check whether the timeout is * still valid, or to reschedule the callout if necessary. If * it is still valid, schedule the task. */ if (usbd_xfer_probe_timeout(xfer)) usb_add_task(dev, &xfer->ux_aborttask, USB_TASKQ_HC); /* * Notify usbd_xfer_cancel_timeout_async that we may have * scheduled the task. This causes callout_invoking to return * false in usbd_xfer_cancel_timeout_async so that it can tell * which stage in the callout->task->abort process we're at. */ callout_ack(&xfer->ux_callout); /* All done -- release the lock. */ mutex_exit(bus->ub_lock); } /* * usbd_xfer_timeout_task(xfer) * * Called in thread context when too much time has elapsed waiting * for xfer to complete. Abort the xfer with USBD_TIMEOUT, unless * it has completed or aborted concurrently -- and if the xfer has * also been resubmitted, take care of rescheduling the callout. */ static void usbd_xfer_timeout_task(void *cookie) { struct usbd_xfer *xfer = cookie; struct usbd_bus *bus = xfer->ux_bus; /* Acquire the lock so we can transition the timeout state. */ mutex_enter(bus->ub_lock); /* * Use usbd_xfer_probe_timeout to check whether the timeout is * still valid, or to reschedule the callout if necessary. If * it is not valid -- the timeout has been asynchronously * cancelled, or the xfer has already been resubmitted -- then * we're done here. */ if (!usbd_xfer_probe_timeout(xfer)) goto out; /* * May have completed or been aborted, but we're the only one * who can time it out. If it has completed or been aborted, * no need to timeout. */ KASSERT(xfer->ux_status != USBD_TIMEOUT); if (xfer->ux_status != USBD_IN_PROGRESS) goto out; /* * We beat everyone else. Claim the status as timed out and do * the bus-specific dance to abort the hardware. */ xfer->ux_status = USBD_TIMEOUT; bus->ub_methods->ubm_abortx(xfer); out: /* All done -- release the lock. */ mutex_exit(bus->ub_lock); } /* * usbd_xfer_probe_timeout(xfer) * * Probe the status of xfer's timeout. Acknowledge and process a * request to reschedule. Return true if the timeout is still * valid and the caller should take further action (queueing a * task or aborting the xfer), false if it must stop here. */ static bool usbd_xfer_probe_timeout(struct usbd_xfer *xfer) { struct usbd_bus *bus = xfer->ux_bus; bool valid; KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); /* The timeout must be set. */ KASSERT(xfer->ux_timeout_set); /* * Neither callout nor task may be pending; they execute * alternately in lock step. */ KASSERT(!callout_pending(&xfer->ux_callout)); KASSERT(!usb_task_pending(xfer->ux_pipe->up_dev, &xfer->ux_aborttask)); /* There are a few cases... */ if (bus->ub_methods->ubm_dying(bus)) { /* Host controller dying. Drop it all on the floor. */ xfer->ux_timeout_set = false; xfer->ux_timeout_reset = false; valid = false; } else if (xfer->ux_timeout_reset) { /* * The xfer completed _and_ got resubmitted while we * waited for the lock. Acknowledge the request to * reschedule, and reschedule it if there is a timeout * and the bus is not polling. */ xfer->ux_timeout_reset = false; if (xfer->ux_timeout && !bus->ub_usepolling) { KASSERT(xfer->ux_timeout_set); callout_schedule(&xfer->ux_callout, mstohz(xfer->ux_timeout)); } else { /* No more callout or task scheduled. */ xfer->ux_timeout_set = false; } valid = false; } else if (xfer->ux_status != USBD_IN_PROGRESS) { /* * The xfer has completed by hardware completion or by * software abort, and has not been resubmitted, so the * timeout must be unset, and is no longer valid for * the caller. */ xfer->ux_timeout_set = false; valid = false; } else { /* * The xfer has not yet completed, so the timeout is * valid. */ valid = true; } /* Any reset must have been processed. */ KASSERT(!xfer->ux_timeout_reset); /* * Either we claim the timeout is set, or the callout is idle. * If the timeout is still set, we may be handing off to the * task instead, so this is an if but not an iff. */ KASSERT(xfer->ux_timeout_set || !callout_pending(&xfer->ux_callout)); /* * The task must be idle now. * * - If the caller is the callout, _and_ the timeout is still * valid, the caller will schedule it, but it hasn't been * scheduled yet. (If the timeout is not valid, the task * should not be scheduled.) * * - If the caller is the task, it cannot be scheduled again * until the callout runs again, which won't happen until we * next release the lock. */ KASSERT(!usb_task_pending(xfer->ux_pipe->up_dev, &xfer->ux_aborttask)); KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); return valid; } /* * usbd_xfer_schedule_timeout(xfer) * * Ensure that xfer has a timeout. If the callout is already * queued or the task is already running, request that they * reschedule the callout. If not, and if we're not polling, * schedule the callout anew. * * To be called in thread context from struct * usbd_pipe_methods::upm_start. */ void usbd_xfer_schedule_timeout(struct usbd_xfer *xfer) { struct usbd_bus *bus = xfer->ux_bus; KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); if (xfer->ux_timeout_set) { /* * Callout or task has fired from a prior completed * xfer but has not yet noticed that the xfer is done. * Ask it to reschedule itself to ux_timeout. */ xfer->ux_timeout_reset = true; } else if (xfer->ux_timeout && !bus->ub_usepolling) { /* Callout is not scheduled. Schedule it. */ KASSERT(!callout_pending(&xfer->ux_callout)); callout_schedule(&xfer->ux_callout, mstohz(xfer->ux_timeout)); xfer->ux_timeout_set = true; } KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); } /* * usbd_xfer_cancel_timeout_async(xfer) * * Cancel the callout and the task of xfer, which have not yet run * to completion, but don't wait for the callout or task to finish * running. * * If they have already fired, at worst they are waiting for the * bus lock. They will see that the xfer is no longer in progress * and give up, or they will see that the xfer has been * resubmitted with a new timeout and reschedule the callout. * * If a resubmitted request completed so fast that the callout * didn't have time to process a timer reset, just cancel the * timer reset. */ static void usbd_xfer_cancel_timeout_async(struct usbd_xfer *xfer) { struct usbd_bus *bus __diagused = xfer->ux_bus; KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); /* * If the timer wasn't running anyway, forget about it. This * can happen if we are completing an isochronous transfer * which doesn't use the same timeout logic. */ if (!xfer->ux_timeout_set) return; xfer->ux_timeout_reset = false; if (!callout_stop(&xfer->ux_callout)) { /* * We stopped the callout before it ran. The timeout * is no longer set. */ xfer->ux_timeout_set = false; } else if (callout_invoking(&xfer->ux_callout)) { /* * The callout has begun to run but it has not yet * acquired the lock and called callout_ack. The task * cannot be queued yet, and the callout cannot have * been rescheduled yet. * * By the time the callout acquires the lock, we will * have transitioned from USBD_IN_PROGRESS to a * completed status, and possibly also resubmitted the * xfer and set xfer->ux_timeout_reset = true. In both * cases, the callout will DTRT, so no further action * is needed here. */ } else if (usb_rem_task(xfer->ux_pipe->up_dev, &xfer->ux_aborttask)) { /* * The callout had fired and scheduled the task, but we * stopped the task before it could run. The timeout * is therefore no longer set -- the next resubmission * of the xfer must schedule a new timeout. * * The callout should not be be pending at this point: * it is scheduled only under the lock, and only when * xfer->ux_timeout_set is false, or by the callout or * task itself when xfer->ux_timeout_reset is true. */ xfer->ux_timeout_set = false; } /* * The callout cannot be scheduled and the task cannot be * queued at this point. Either we cancelled them, or they are * already running and waiting for the bus lock. */ KASSERT(!callout_pending(&xfer->ux_callout)); KASSERT(!usb_task_pending(xfer->ux_pipe->up_dev, &xfer->ux_aborttask)); KASSERT(bus->ub_usepolling || mutex_owned(bus->ub_lock)); }